单塔精馏生产优级品乙酸的研究

用理论计算与实验相结合的办法 ,采用单塔精馏生产优级品乙酸 ,以降低能耗 ,减少物料损失 ,提高产品收率 ,缩短生产周期 ,避免了双塔精馏所造成的设备与能源的浪费。在国内首次成功研究了单塔精馏生产优级品乙酸的生产工艺。     

Model algorithmic control of grade change operations in paper mills

In this work, the Model Algorithmic Control (MAC) method is applied to control the grade change operations in paper mills. The neural network model for the grade change operations is identified first and the impulse model is extracted from the neural network model. Results of simulations for MAC control of grade change operations are compared with plant operation data. The major contribution of the present work is the application of MAC in the industrial plants based on the identification of neural network models. We can confirm that the proposed MAC method exhibits faster responses and less oscillatory behavior compared to the plant operation data in the grade change operations.     

On-line identification of interacting two-tank system

In order to demonstrate the effectiveness of the process identification algorithm, on-line parameter estimator is evaluated experimentally by using two-tank system with interaction. On-line parameter estimator used in this paper is based on a recursive parameter estimation algorithm. MIMO linear, bilinear and quadratic models based on ARMA model are used to identify two-tank system. A quadratic model for two-tank system with interaction is developed to confirm the propriety of MIMO quadratic model used in identification of two-tank system. The results of on-line identification experiments on the two-tank system show that the estimated parameters of each model converge and the output tracking errors are bounded by disturbance bound. But, the quadratic model showed the best convergence.     

Generating Web Traffic Based on User Behavioral Model

Generating web traffic is of great importance to analyze performance of new designed network, test new equipment, and verify new protocols, etc.. However, most existing traffic generation systems tend to simulate the overall characteristics of network traffic, while neglecting of the behavior of the individual users. Nevertheless, in principle, the emerged characteristics of overall traffic originate from the aggregation of individual users＇ access behavior. In this paper, we propose an innovative web traffic generating method based on user browsing behavior. Our method simulates the real users＇ accessing behavior, and visits the real web servers. Then, we design and develop a web traffic generating system. Because our system accesses the real websites, it can produce almost the real network traffic. The test results show that the traffic generated by our system has characteristics of burstiness and self-similarity, which are widely found and characterized in many real networks. In addition, our system can better reflect real user＇s web browsing behavior.     

An electrochemically regenerative hydrogen-chlorine energy storage system: electrode kinetics and cell performance

The electrochemical oxidation and reduction of hydrogen and chlorine in hydrochloric acid has been investigated on graphite, ruthenized titanium and platinum electrodes. Both steady state and potentiostatic pulse methods were used. Cell studies were also carried out in cells with flow-by and flow-through chlorine electrodes. Results indicate that the electrode kinetics are fast and the electrolysis and fuel cell reactions can be carried out in the same cell with electric-to-electric efficiencies in excess of 75% at current densities of 300 mA cm^–2. Mass transfer limitations at the chlorine electrode during discharge can be eliminated by cell pressurization and the use of flow-through electrodes.This study was carried out under the auspices of the US Department of Energy.in the summers of 1976 and 1977     

频域二元纯相位编码压缩成像

超分辨率被认为是光学成像和图像处理的"圣杯"之一.压缩感知理论的引入给出一种新的实现从单幅低分辨率图像的超分辨率重构方法,避免了传统超分辨率方法需要多幅亚像素图像的弊端.在分析压缩感知测量矩阵与光学成像系统之间对应约束异同的基础上,提出一种基于4-f光学架构的频域二元相位编码压缩成像方法,可以实现在单次曝光条件下获得的单幅低分辨率测量图像中实现超分辨率重建,不需要其他任何额外的信息采集.二元相位掩膜比均匀相位掩膜更容易物理实现,是压缩成像物理实现的一种更加可行的方案.模拟实验表明提出的方法可以有效地捕获图像的信息与高精度重建.此外,对于大尺度图像重建,该方法在重建时间方面优于Romberg提出的随机解调方法,在更符合实际方面的采样策略方面优于Yin提出的RecPC方法.     

空间低温氧化物熔体晶体生长的数字模拟研究

地面上 ,由于受浮力对流、分层和沉淀等因素的影响 ,难以阐明晶体生产和凝固现象的本质 ,从而无法获得组份均匀、结构完整和性能优良的材料 ,因此自七十年代以来 ,已进行了大量的空间晶体生长实验 ,但由于对空间环境在晶体生长过程中的流体效应参数缺乏了解 ,实验结果往往与设想的不一致。数字模拟方法可以模拟实际晶体生产过程 ,了解晶体生长参数的变化对晶体生长的影响 ,本文利用数字模拟的方法 ,对本实验室建立的空间三维实时观察装置中 ,低温生产NaNO3熔体晶体中的流体效应及温场进行了数字模拟研究 ,结果表明 ,在地面生长 ,熔体内部存在复杂的双涡流动模式 ,重力对熔体中的温场和速度场的分布产生强烈的作用 ,而在空间 ,当微重力水平达到一定程度时 ,可以使熔体中的流动模式简单化 ,从而降低流动效应对传热、传质造成的不稳定性和不均匀性 ,有利于提高晶体生长的质量。同时通过对流场中的温度分布分析表明 ,降低重力可以明显改变晶体生长固液界面附近的温度梯度 ,并使温场 ,速度场分布朝着稳态生长的方向发展     

A novel synthesis method for the preparation of aromatic poly(imide benzoxazole) from trimellitic anhydride chloride and bis(o‐aminophenol)

A poly(imide benzoxazole) was prepared directly from trimellitic anhydride chloride and 2,2‐bis(3‐amino‐4‐hydroxyphenyl)hexafluoropropane (BisAPAF) monomers in a two‐step method. In the first step, a poly(hydroxyamide amic acid) precursor was synthesized by the low‐temperature solution polymerization in an organic solvent. Subsequently, thermal cyclodehydration of the poly(hydroxyamide amic acid) precursor at 350°C produced the corresponding poly(imide benzoxazole). The inherent viscosity of the precursor polymer was 0.22 dL/g. The cyclized poly(imide benzoxazole) showed a glass transition temperature (T_g) at 329°C and a 5% weight loss temperature at 530°C in nitrogen and at 525°C in air. The poly(imide benzoxazole) is amorphous as evidenced by the wide‐angle X‐ray diffraction measurement. The structures of the precursor polymer and the fully cyclized polymer were characterized by Fourier transform infrared (FTIR) and proton nuclear magnetic resonance spectroscopy (¹H NMR). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2388–2391, 2003     

5-氰基-4-氨基咪唑的合成与热性能

咪唑基含能化合物是目前高能化合物的重要研究方向，而5-氰基-4-氨基咪唑是设计、合成新型咪唑联四唑类高能高氮化合物的关键中间体。以5-甲酰胺基-4-氨基咪唑（AICON）为原料，经其与三氯氧磷（POCl3）的脱水反应获得了5-氰基-4-氨基咪唑（AICN），通过优化反应体系、反应温度、反应时间以及物料物质的量比，使得AICN的收率>65%，纯度（HPLC）>99.5%。此外，采用NMR、IR和元素分析对其进行了结构确征，利用热重分析法研究其热性能。结果表明：AICN的最佳反应条件为以POCl3为脱水剂，n(AICON)：n(POCl3)为1:10，反应升温模式为先快速升温至80~85 ℃，维持反应30 min，然后降温至70~75 ℃，维持反应1~1.5 h；AICN在40~1000 ℃温度区间存在两个失重过程，对应的热分解温度区间分别为40~400 ℃和400~1000 ℃、热失重分别为19.8%和60.7%、热分解峰温分别为256.5和698.4 ℃，表明其具有良好的热稳定性。     

嵌入式ARM多核处理器并行化方法的研究

随着嵌入式处理器技术的不断发展以及人们对嵌入式设备性能的要求越来越高,嵌入式处理器由单核时代进入多核时代。然而,传统嵌入式系统软件开发方法还是基于单核模式,并没有利用嵌入式多核处理器多核并行化的特点,没有充分发挥嵌入式多核处理器的性能。虽然在PC平台上,多核并行化方法相对更成熟,但嵌入式多核处理器在处理器数目、Cache以及总线等方面有很大不同,嵌入式平台多核并行化并不能借助PC平台的实践方法,因此基于嵌入式平台研究多核并行化的方法是很有意义的。